Concealed Drawer Runners, Full Extension, Load Bearing Capacity 40/50/60 kg, Dynapro

With integated Soft-close®

  • Runner type

    The type of runner is determined by the design of the running elements, independently of the mounting method.

     
     
     

    Plastic guide railsact as gliding surfaces that support the weight of drawers and their contents.

     
     
     
     
     
     

    Roller guided drawer runnersThe running elements are rollers. The type of roller varies from friction bearing mounted polyamide rollers to ball bearing mounted polyamide rollers, ball bearing mounted polyamide-coated steel rollers and soft rollers for silent moving.

     
     
     
     
     
     

    Ball guided drawer runnersSteel or plastic balls in ball cages are used as the running elements.

    Groove mounted runners, are a subgroup of the ball bearing runners and are characterised by following features:

    • The runners are recessed into a groove that is milled into the drawer side or side panel.
    • Small gap between drawer and side panel
    • Installation with threaded screw inside the drawer
    • Can be removed by loosening the screws
     
     
     
     
     
     

    Roller bearing guided concealed dynamic runnersRollers are running elements in running gears.

     
     
     
     
     

    Mounting option

    Internal drawer

    The drawer front panel is flush or set back from the cabinet side panel.

     
     
     
     
     
     

    Load bearing capacity

    The load bearing capacity values for Accuride runners apply to a rail length of 450 mm and an extension width of 450 mm. Unless otherwise specified, the load bearing capacity of longer rails is about 20 % less.

     
     
     

    Something that all of the information has in common is the fact that the values for dynamic loading apply, and only if all mounting holes are screw-connected using suitable fastening material.

     
     
     

    The load bearing capacity of ball bearing runners that are suitable for side and base mounting is reduced to about 25% if the ball bearing runners are installed horizontally.

     
     

    We recommend trial mounting to determine if lowering lies within an acceptable range.

    Installation options

     
     
     

    On shelves

     

    Side mounted

    Base mounted I

    Base mounted II

    Suspended

     
     
     
     
     
     
     
     
     
     

    On drawers

     

    Groove mounted

    Side mounted

    Base mounted�

    Suspended

    Concealed

     
     
     
     
     
     
     
     
     
     

    On cabinets

     

    Side mounted

    Suspended

    Base panel mounting

    Help

    Help

    Requested amount is in stock.
    Limited stock available.
    Item no longer available

    Note:
    To receive items as fast as possible, choose 'when available' at checkout.

    NONE Min. 1
    See Required Products

    433.19.727 Dynapro Conc DrwRun Full 40kg 270mm SZP

    With integated Soft-close® –, Nominal length 270 mm, drawer length 260 mm, load capacity 40 kg

    433.19.745 Dynapro Drawer Run Full St ZP 40kg 450mm

    With integated Soft-close® –, Nominal length 450 mm, drawer length 440 mm, load capacity 40 kg

    Product details
    • Featuring revolutionary tool less 4D adjustment which gives vertical tilt,side to side and depth adjustment (ideal for perfect alignment and accurate gaps, for inframe and lay on applications)
    • 100% fully synchronised runner giving silent, smooth operation throughout the movement of the drawer
    • Incredibly stable with the lowest deflection rates available
    • With integated Soft-close®

    Mounting

    Slide-on

    Adjustment facility

    Height adjustment +3.5 mm, side adjustment ±1.5 mm, and tilt adjustment +4 mm without tools using 3D clips

    Installation

    32mm drilling pattern

    Finish

    Zinc plated
    Product Features

    Supplied with

    1 Pair of drawer runners

    1 Pair of snap-in couplings

    1 Pair of rear adjusting adapters

    1 Set of synchronisation modules and levers (only Tipmatic)

    1 Synchronisation rod for cabinet width max. 1,200 mm (only Tipmatic)

    1 Set of installation instructions

    Order reference

    Order front and rear clip fixing 3D sets separately, one set required per pair of runners

    Order Varianta Ø 3 countersunk and Hospa Ø 4.0 pan head screws separately

    Required products

    Concealed Drawer Runners, Full Extension, Dynapro 40 kg


    NONE
    This product has 1 required products

    Front and rear fixing clips

    Art no.
    Complementary products and accessories