Standard functions
Operation by holding an authorised user key in front of the antenna which then transmits an opening pulse to the furniture lock
Spring bolt lock function: 3 s after the lock has been released, it is automatically locked again (open time setting variable up to 30 s).
Deadbolt lock function: The lock is permanently unlocked or locked by holding an authorised user key in front of the lock
acoustic feedback as read confirmation of the keys
keyed alike furniture locks:
An authorised user key unlocks all locks which are connected to the FT 200 / FT 200 CAP furniture terminal simultaneously.
keyed to differ furniture locks:
An authorised user key unlocks only certain locks, even though several locks are connected to the FT 200 / FT 200 CAP furniture terminal.
Several furniture locks can also be implemented with the MLA 6P / MLA 8 multi-lock adapters.
More information on functionality can be found under the MLA 6P / MLA 8 multi-lock adapters.
One CC 200 connection cable is also required for each furniture lock.
Optional functions:
Indication of the locking status, e.g. unlocked door, by means of acoustic or visual (external LED) signal transmitters
With the spring bolt lock function, the opening time of the furniture locks can be set variably up to 30 seconds with the red and green programming card
Customer-specific requirements (e.g. installation of an acoustic signal generator or actuation of an alarm system) can be implemented using macro programs by request
Notes concerning software operation:
If the Dialock software is being used, please contact your appropriate Häfele member of staff.
Notes concerning macro programs:
Macro programs must be specified beforehand using a request form. This can be found at www.dialock-support.de in the Service section.
An MDU 110 data transfer unit and instruction from Dialock technician is required for programming. In the event of detailed questions, please contact your appropriate Häfele member of staff.
