Plinth step solution, Blum Space Step

  • CAD data available.
    Please select an article to view.

Filter

Complete your selection

Help

Help

Requested amount is in stock.
Limited stock available.
Item no longer available

Note:
To receive items as fast as possible, choose 'when available' at checkout.

Plinth step solution, Blum Space Step

  • see key

    ① Drawer runners
    ② Standing profile
    ③ Corner connector
    ④ Standing feet
    ⑤ Rear shelf holder
    ⑥ Front connector
    ⑦ Spring buffer
    ⑧ Sticker
    ⑨ Cross profile
    ⑩ Spacer bar

  • Flush

  • With offset and low plinth

  • With offset

Image may show a similar article, please check product details.

55866500 product photo

Plinth step solution, Blum Space Step

Nominal length: 410 mm

Art. no. 558.66.500
55866501 product photo

Plinth step solution, Blum Space Step

Nominal length: 460 mm

Art. no. 558.66.501
Product details

Product Material

Aluminium and plastic

Colour/finish

Matt Orion grey

Installation note

4 spring buffers are recommended from a cabinet width of more than 900 mm.
Max. load: 150 kg. As the manufacturer, you are responsible for approving the actual load bearing capacity of the furniture item with Space Step that you have manufactured in accordance with EN-14183, and this must be specified on the manufacturer label.
A 3-layer panel (3S) with thickness of at least 21 mm is recommended for the plinth step.
The surface of the step must be non-slip. This can be realised using an anti-slip mat which is directly attached to the surface of the step, or by using a non-slip board material.
Affixing the sticker: EN-14183 stipulates that the two provided stickers must be affixed.
Pull out beneath Space-Step: Only 30 kg or 40 kg runners may be used. The dynamic load bearing capacity for the pull out below Space-Step is 20 kg.

Supplied with

2 Tandem drawer runners left/right
2 upright profiles
2 corner connectors
2 upright feet
2 shelf supports, rear
1 front connector set (magnet and adhesive plate)
4 spring buffers
2 stickers (safety instructions and manufacturer information)
14 flat head screws 4 x 15 mm
Installation instructions

Additional information attributes

4 spring buffers are recommended from a cabinet width of more than 900 mm.
Max. load: 150 kg. As the manufacturer, you are responsible for approving the actual load bearing capacity of the furniture item with Space Step that you have manufactured in accordance with EN-14183, and this must be specified on the manufacturer label.
A 3-layer panel (3S) with thickness of at least 21 mm is recommended for the plinth step.
The surface of the step must be non-slip. This can be realised using an anti-slip mat which is directly attached to the surface of the step, or by using a non-slip board material.
Affixing the sticker: EN-14183 stipulates that the two provided stickers must be affixed.
Pull out beneath Space-Step: Only 30 kg or 40 kg runners may be used. The dynamic load bearing capacity for the pull out below Space-Step is 20 kg.

Complementary products and accessories
Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263
Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com
15-Feb-2025