Glass Door Lever Lock Case, for Glass Thickness 4-10 mm, Symo 3000

Closure direction A (D, F ,G*), matt nickel plated

Art. no. 233.42.700

  • Befestigung

    Hebelschlösser können auf zwei Arten befestigt werden, die je nach Einsatzbereich, insbesondere abhängig von Türdicke und ‐material, die Wahl des Schlosses bestimmen: entweder Mutternbefestigung oder Klammerbefestigung.

    Mutternbefestigung mit Sechskantmutter

    Das Schloss wird in die vorbereitete Bohrung geschoben und auf der Innenseite mit einer Sechskantmutter (liegt dem Schloss bei) befestigt.

    Durch zusätzliche Verdreh‐Sicherungsscheiben wird das Schloss vor gewaltsamem Verdrehen geschützt. Für den Einbau in dünne Türen kann das Schloss mit Distanzscheiben versehen werden. Danach wird der Hebel (Position abhängig von gewünschtem Schließweg) montiert.

    Klammerbefestigung

    Bei dünnen Türen (z. B. Stahltüren) wird häufig die Klammerbefestigung gewählt. Das Schloss wird durch eine an der Innenseite der Tür anzubringende Klammer befestigt. Diese Klammer schützt gleich­zeitig das Schloss gegen gewaltsames Verdrehen. Danach wird der Hebel (Position abhängig von gewünschtem Schließweg) montiert.

    Schließweg

    Bei den Hebelschlössern wird der Schließweg mit Buchstaben oder Ziffern angegeben. Diese beziehen sich auf die in den Tabellen dargestellten Einbausituationen. Schlösser mit Schließweg 180° können für alle Schließwege umgebaut werden, Lieferzustand ist Schließweg 1.

    Schlösser mit Schließweg 90° werden in links‐ bzw. rechtsschließende Schlösser unterschieden. Hier wird die Schließrichtung mit Hilfe von ­Buchstaben angegeben. Der voranstehende Buchstabe kennzeichnet den Lieferzustand, die in Klammern stehenden Schließwege können durch Umstecken des Schließhebels eingestellt werden (Beispiel: Schließweg A (D, F, G)).

    Schließweg für Hebelschlösser 90°

    Schließweg für Hebelschlösser 180°

    Schließrichtung links

    Schließrichtung rechts

    Schließzwang

     
     

    Viele Hebelschlösser haben Schließzwang. Dies bedeutet, dass der Schlüssel nur abgezogen werden kann, wenn das Schloss abgeschlossen wurde.

  • Symo is a modular cylinder core system from Häfele. Without tools and time-consuming installation, it provides maximum flexibility at minimum costs and effort.

     

    Due to the variety of components within the Symo system, all present and future applications can be covered – and all this with maximum freedom during planning and execution.

     

    All components of the Symo system can be combined as required and exchanged, modified or upgraded at any time.

     

    Locking plans can be modified easily, quickly and economically. Only the cylinder core is replaced (without tools), the lock - and therefore the piece of furniture - remains untouched.

    Rational furniture production

    Since the lock and the cylinder core are separated, the locks can be pre-mounted in the furniture and are fully functional through their protective caps. The protective caps can be replaced easily and without tools by the required cylinder core at any time. The furniture can therefore be produced independently from its future use and from the required locking plans, and can be equipped with the required locks. This allows rational mass-production. The individual locks can be integrated into the locking plan by inserting the cylinder cores at any time, even after the furniture has been set up.

    Inserting and removing cylinder cores without tools

    No tools are required for inserting and removing the cylinder cores, which can also be done at any time after the locks have been installed. The cylinder cores can only be inserted or removed with the lock in open position. The cylinder can be removed using a removal key.

    Maintain the cylinder cores every 6 month, but do not treat the cylinder cores with graphite!

    Flexibility and economic efficiency – at any time

    Previously, removals, changed locking plans and security requirements as well as lost keys were the weak points of every locking plan which always required time-consuming and costly modification measures. Symo provides maximum flexibility even years after completion. Simply replace the cylinder cores to adapt the furniture locking concept to changed requirements. No tools are required and the installation is fast and simple. Whatever the requirements are: Symo is prepared.

     

    Plate cylinder or pin tumbler cylinder?

    With the Symo locking system you can choose between plate cylinders and pin tumbler cylinders.

     
     
     
     
     
    UniversalUniversal Objekt
     
     
     
     
     
     
     
     
     
     
     
     
     
     

    Premium 5

    Premium 20

    One protective cap, several functions !

     

     
     

    The protective caps for the Symo locks not only protect the interior of the cylinder housing against dirt or damages during the construction phase, but also function as temporary construction keys that can be operated with a coin or screwdriver due to their design. After construction is completed, the protective caps can be removed easily without tools and replaced by the required cylinder cores.

    Closure direction A (D, F ,G*), matt nickel plated

    Art. no. 233.42.700

    Art. no. 233.42.700
    Help

    Help

    Requested amount is in stock.
    Limited stock available.
    Item no longer available

    Note:
    To receive items as fast as possible, choose 'when available' at checkout.

    Piece Min. 1
    See Required Products
    Article details
    • Closure directions can be altered by re-positioning the cam, but always moving in the same direction*:
    • Closure direction A can be altered to D, F or G
    • Closure direction B can be altered to C, E or H
    • Closure travel: 90º locking cam (reversible), 180º key

    Application

    For cylinder cores that are inserted from the front on site

    Installation

    For screw fixing with hexagon nut

    For glass door thickness

    4 – 10 mm

    Material

    Zinc alloy
    Show more information
    Product Features

    Supplied with

    1 Locking cam

    1 Mounting nut

    1 Angled steel striking plate

    1 Clamping plate

    1 Clamping plastic rosette

    Order reference

    Please order counterpiece for 2-leaf sliding doors separately.

    Complementary products and accessories
    17-Jun-2019

    Glass Door Lever Lock Case, for Glass Thickness 4-10 mm, Symo 3000

    For combination with Symo cylinder removable core, Closure direction A (D, F ,G*), matt nickel plated

    • Drilling pattern

    Image may show a similar article, please check product details.

    Note

    Please select an article via the features or article table in order to add it to the basket.