Exposed Axle Hinge, 270/240°, with 5 mm Exposed Axle, for Thin Doors

Shallow design

Manuals and Videos
  • CAD data available.
    Please select an article to view.
  • Technical documents available.
    Please select an article to view.
Aximat Thin Panel Hinge Instructions
Complete-Hafele-FF-Technology- 2018 Product page 9.146

Solutions for this product

Filter

Complete your selection

Version

Help

Help

Requested amount is in stock.
Limited stock available.
Item no longer available

Note:
To receive items as fast as possible, choose 'when available' at checkout.

Exposed Axle Hinge, 270/240°, with 5 mm Exposed Axle, for Thin Doors

Shallow design

  • see key

    Number of hinges per door
    The values in the diagram are sample measurements for doors up to 600 mm wide.
    With doors widths less than 400 mm, the minimum gap must be determined by trial mounting.
    The door’s width must not exceed its height.
    The distance between door edge and uppermost / lowermost hinge should be no more than 100 mm.
    In case of heavy loads and high leverage force, an additional hinge (dim. X max. 100 mm) mounted below the top hinge is recommended.

Image may show a similar article, please check product details.

View 2 Articles
34475760 product photo

Exposed Axle Hinge, 270/240°, with 5 mm Exposed Axle, for Thin Doors

Shallow design, Overlay 3.5 mm, 10/13 mm side wall thickness for side/centre panel mounting

Art. no. 344.75.760
select
34475770 product photo

Exposed Axle Hinge, 270/240°, with 5 mm Exposed Axle, for Thin Doors

Shallow design, Overlay 7.0 mm, 13/19 mm side wall thickness for side/centre panel mounting

Art. no. 344.75.770
select
Product details

Ø 5 mm axle, 47 mm length
0 mm door offset from 140° opening angle
270° opening angle for full overlay, 240° for half overlay
With catch

  • High quality hinge, tested to ANSI Grade 1 (100,000) cycles
    For thin doors
    For HPL panels

Maximum project quality in compliance with ANSI grade 1 (100,000 cycles)

Area of application

For thin doors
for laminate panels (HPL)

Concealed hinge version

Full overlay/half overlay mounting

For door material

Laminate

Door processing for assembly

without

Material

Zinc alloy

Colour/finish

Opening angle

270°

For door thickness

10 – 13 mm

Side panel thickness

10 – 13 mm

Knuckle diameter

5.00 mm

Knuckle length

47.00 mm

Adjustment facility

Side adjustment: 1 mm, Height adjustment: -2 – 2 mm, Height adjustment in cup part via eccentric Depth adjustment via horizontal slots in side component

Installation

For corner or centre panel mounting, 6 mm gap

Supplied with

Hinge
Fixing material (specially coated self-tapping screws)

Additional information attributes

Other colours available on request

Complementary products and accessories
Compare selection

Please login to save products to your wishlist

ppic-04083697.jpg
Specialist Hinge, 240°, Grade 304 Stainless Steel, for Thin Doors
344.75.751
View 1 Article
Compare selection

Please login to save products to your wishlist

ppic-04089650.jpg
Opening Angle Restraint, for Aximat 300 Exposed Axle Hinges
344.00.991
View 1 Article
Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263
Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com
16-Apr-2024