Exposed Axle Hinge, 180°, Half Overlay Mounting, Aximat 100

Zinc alloy

Manuals and Videos
  • CAD data available.
    Please select an article to view.
  • Technical documents available.
    Please select an article to view.
Safety notes
Manufacturer information
Aplus-Furniture-Fittings-Catalogue- 2018 Product page 423

Solutions for this product

Filter

Complete your selection

Help

Help

Requested amount is in stock.
Limited stock available.
Item no longer available

Note:
To receive items as fast as possible, choose 'when available' at checkout.

Exposed Axle Hinge, 180°, Half Overlay Mounting, Aximat 100

Zinc alloy

  • 2D adjustment

  • Number of concealed hinges per door

    see key

    The values in the diagram are sample measurements for doors up to 600 mm wide.
    With door widths of less than 400 mm, the minimum gap must be provided by trial mounting.
    The doors should not be wider than tall.
    The distance between the hinges of doors with two hinges must be at least as long as the door is wide, if possible even longer.
    In case of heavy loads and high leverage force, an additional hinge of max. 100 mm (dim. X) mounted below the top hinge is recommended.

Image may show a similar article, please check product details.

View 2 Articles
34421001 product photo

Exposed Axle Hinge, 180°, Half Overlay Mounting, Aximat 100

Zinc alloy, Screw fixing cup, Hospa screw fixing arm, 48/6

Art. no. 344.21.001
select
34421011 product photo

Exposed Axle Hinge, 180°, Half Overlay Mounting, Aximat 100

Zinc alloy, Screw fixing cup, pre-mounted Euro screw fixing arm, 48/6

Art. no. 344.21.011
select
Product details

Large opening angle provided by external pivot point (axle)
Almost no loss of space inside the cabinet due to the flat design
Cabinet construction or continuous construction possible
With integrated automatic closing spring

  • LGA tested project quality in compliance with DIN EN 15570 test level 3 (80,000 cycles)
    Door installation with slide on (Aximat 100 A) or time saving quick fixing system (Aximat 100 SM)
    2 or 3-dimensional adjustment facility for optimum alignment of the gap pattern
    Half overlay mounting
    Side panel mounting

Area of application

For cabinet construction and continuous construction

Version

with catch

Concealed hinge version

For door material

Door processing for assembly

Product Material

Zinc alloy

Colour/finish

nickel plated

Opening angle

180°

For door thickness

≤20 mm

Cup drilling depth

11.50 mm

Cup drilling Ø

Cup fixing

Drilling pattern

Gap

6.00 mm

Door overlay

6.50 mm

Adjustment facility

Side adjustment: 0 mm, Height adjustment: -2 – 2 mm, 2-dimensional

Installation

Hinge arm fixing into 32 mm series drilled holes

Order reference

Order Hospa Ø 3.5 mm raised head screws separately for Hospa screw fixing versions

Complementary products and accessories
Compare selection

Please login to save products to your wishlist

ppic-04086936.jpg
Exposed Axle Hinge, 180°, Twin Mounting, Aximat 100
View 1 Article
Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263
Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com
12-Jul-2025