Cam Lock Clip, for Symo 3000 Cam Lock Case

for cam lock with nut attachment – Nickel plated

Art. no. 235.88.990

  • Information on cam lock closure travel and closure direction
  • Befestigung

    Hebelschlösser können auf zwei Arten befestigt werden, die je nach Einsatzbereich, insbesondere abhängig von Türdicke und ‐material, die Wahl des Schlosses bestimmen: entweder Mutternbefestigung oder Klammerbefestigung.

    Mutternbefestigung mit Sechskantmutter

    Das Schloss wird in die vorbereitete Bohrung geschoben und auf der Innenseite mit einer Sechskantmutter (liegt dem Schloss bei) befestigt.

    Durch zusätzliche Verdreh‐Sicherungsscheiben wird das Schloss vor gewaltsamem Verdrehen geschützt. Für den Einbau in dünne Türen kann das Schloss mit Distanzscheiben versehen werden. Danach wird der Hebel (Position abhängig von gewünschtem Schließweg) montiert.


    Bei dünnen Türen (z. B. Stahltüren) wird häufig die Klammerbefestigung gewählt. Das Schloss wird durch eine an der Innenseite der Tür anzubringende Klammer befestigt. Diese Klammer schützt gleich­zeitig das Schloss gegen gewaltsames Verdrehen. Danach wird der Hebel (Position abhängig von gewünschtem Schließweg) montiert.


    Bei den Hebelschlössern wird der Schließweg mit Buchstaben oder Ziffern angegeben. Diese beziehen sich auf die in den Tabellen dargestellten Einbausituationen. Schlösser mit Schließweg 180° können für alle Schließwege umgebaut werden, Lieferzustand ist Schließweg 1.

    Schlösser mit Schließweg 90° werden in links‐ bzw. rechtsschließende Schlösser unterschieden. Hier wird die Schließrichtung mit Hilfe von ­Buchstaben angegeben. Der voranstehende Buchstabe kennzeichnet den Lieferzustand, die in Klammern stehenden Schließwege können durch Umstecken des Schließhebels eingestellt werden (Beispiel: Schließweg A (D, F, G)).

    Schließweg für Hebelschlösser 90°

    Schließweg für Hebelschlösser 180°

    Schließrichtung links

    Schließrichtung rechts



    Viele Hebelschlösser haben Schließzwang. Dies bedeutet, dass der Schlüssel nur abgezogen werden kann, wenn das Schloss abgeschlossen wurde.

  • Symo cylinder cores
  • Symo is a modular cylinder core system from Häfele. Without tools and time-consuming installation, it provides maximum flexibility at minimum costs and effort.


    Due to the variety of components within the Symo system, all present and future applications can be covered – and all this with maximum freedom during planning and execution.


    All components of the Symo system can be combined as required and exchanged, modified or upgraded at any time.


    Locking plans can be modified easily, quickly and economically. Only the cylinder core is replaced (without tools), the lock - and therefore the piece of furniture - remains untouched.

    Rational furniture production

    Since the lock and the cylinder core are separated, the locks can be pre-mounted in the furniture and are fully functional through their protective caps. The protective caps can be replaced easily and without tools by the required cylinder core at any time. The furniture can therefore be produced independently from its future use and from the required locking plans, and can be equipped with the required locks. This allows rational mass-production. The individual locks can be integrated into the locking plan by inserting the cylinder cores at any time, even after the furniture has been set up.

    Inserting and removing cylinder cores without tools

    No tools are required for inserting and removing the cylinder cores, which can also be done at any time after the locks have been installed. The cylinder cores can only be inserted or removed with the lock in open position. The cylinder can be removed using a removal key.

    Maintain the cylinder cores every 6 month, but do not treat the cylinder cores with graphite!

    Flexibility and economic efficiency – at any time

    Previously, removals, changed locking plans and security requirements as well as lost keys were the weak points of every locking plan which always required time-consuming and costly modification measures. Symo provides maximum flexibility even years after completion. Simply replace the cylinder cores to adapt the furniture locking concept to changed requirements. No tools are required and the installation is fast and simple. Whatever the requirements are: Symo is prepared.


    Plate cylinder or pin tumbler cylinder?

    With the Symo locking system you can choose between plate cylinders and pin tumbler cylinders.

    UniversalUniversal Objekt

    Premium 5

    Premium 20

    One protective cap, several functions !



    The protective caps for the Symo locks not only protect the interior of the cylinder housing against dirt or damages during the construction phase, but also function as temporary construction keys that can be operated with a coin or screwdriver due to their design. After construction is completed, the protective caps can be removed easily without tools and replaced by the required cylinder cores.



    Requested amount is in stock.
    Limited stock available.
    Item no longer available

    To receive items as fast as possible, choose 'when available' at checkout.

    Piece Min. 1
    Add to basket

    Looks like you don't have permission to add this product to your cart. Kindly get in touch with your sales representative for assistance.

    Your search for null returned no results.

    Cam Lock Clip, for Symo 3000 Cam Lock Case

    for cam lock with nut attachment – Nickel plated

    • Drilling pattern

    • (1) Notch for steel cam lock clip

    • Drilling pattern

    Image may show a similar article, please check product details.

    Article details


    For cam locks with nut attachment, for mounting cam locks in metal doors, also as additional protection against twisting

    For sheet thickness

    0,8-1,5 mm


    Complementary products and accessories
    Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263
    Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: